4 x 630cc 60lb Fuel Injectors fit Siemens Deka EV1 for VW Audi Bosch 1.8T E85 t
This is a set of 4 Genuine Deka IV EV1 60 lb/hr High Resistance, saturated fuel injectors. These are the newer style skinny injectors, with EV1 electrical connections. Any Ford 4 Cylinder Engine with Bosch EV1 or EV6 style injectors. Any BMW 4 Cylinder Engine with Bosch EV1 or EV6 style injectors. Audi A4 S4 TT 1.8L 1.8T. VW Golf, Passat, Jetta IV 1.8 T. Any Lancia Delta Model including. HF, 4WD, Turbo, 8V, 16V, Evo, Evo1, Evo2, HF4WD. Resistance: 12 ohms (High Impedance, High Resistance). Voltage: 8-15 Volts, nominal 13.5 Volts. Amperage: 1.0 Amps. Pressure: Min 30 PSIG / Max 100 PSIG. O-Rings Included: Yes, on the injectors. Injector Body Design: Metal and composite plastic. Electrical connector type: EV1 (Minitimer, Jetronic). Overall Length: 2 7/8 inches, 74 mm. O-ring to O-ring Length: 2 1/2 inches, 63 mm. Orings: Top and bottom, 14.5 mm. These Deka IV injectors flow 60 lbs/hr at 43.5 PSI (3 BAR) and up to 80 lbs/hr at 80 PSI! Despite the high flow rate these units are high-impedance, plus they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed drive-ability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.
