Fit Nissan 180sx 240sx s13 SR20 SR20DET bosch ev14 650cc Fuel Injectors rail

Fit Nissan 180sx 240sx s13 SR20 SR20DET bosch ev14 650cc Fuel Injectors rail
Fit Nissan 180sx 240sx s13 SR20 SR20DET bosch ev14 650cc Fuel Injectors rail
Fit Nissan 180sx 240sx s13 SR20 SR20DET bosch ev14 650cc Fuel Injectors rail
Fit Nissan 180sx 240sx s13 SR20 SR20DET bosch ev14 650cc Fuel Injectors rail
Fit Nissan 180sx 240sx s13 SR20 SR20DET bosch ev14 650cc Fuel Injectors rail
Fit Nissan 180sx 240sx s13 SR20 SR20DET bosch ev14 650cc Fuel Injectors rail

Fit Nissan 180sx 240sx s13 SR20 SR20DET bosch ev14 650cc Fuel Injectors rail
Bosch ev14 650cc top-feed fuel rail conversion kit for the sr20 s13 engine. Looking for bigger injectors for your high powered Nissan? Clean Injection SR20 top-feed Conversion Kit is designed to be a easy direct installation requiring no. Simple way to convert from the standard side-feed Injector setup to the common Top-feed fuel rail/injector setup. The kit includes 4pcs bosch ev14 650cc high impedance injectors which are packed in balanced sets to insure cylinder to cylinder horsepower equilibrium. The injectors are flow tested statically and dynamically at different rpms and pulse widths and balanced within 1 percent of each other. Injectors will come with flow chart showing flow results from 3 bar to 4 bar fuel pressure. Will also include dead time/injector latency data to make tuning a breeze. The Injectors is compatible with all known race fuels in today’s market including e85/alcohol base fuels. This setup will support 300+ rear wheel horsepower with correct tuning and proper fuel! Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability. No modifications needed to install. Plug and play injector connectors included. Plugs right into the factory injector harness without modifications. This injector set contains high impedance injectors matched to the saturated injector signal. Works with factory or aftermarket ECU supporting high impedance injectors. Matched within 1 percent of each other. Flow results with injector data included. Fuel rail anodized coated making it resistant to. Corrosion from high ethanol content fuels like E85. Direct Fit for all Nissan with S13 Silvia (SR20DE). Static Flow Rate (GAS): 650cc at 3 BAR Coil Resistance: 12.3 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers). 4(pcs) 650cc ev14 Bosch Fuel injectors. 1-SR20DET Anodize Black S13 Top-Feed Fuel Rail Conversion Kit. 4(pcs) Plug and play injector connectors. NOTE: INTAKE MANIFOLD NOT INCLUDED IN LISTING. The item “Fit Nissan 180sx 240sx s13 SR20 SR20DET bosch ev14 650cc Fuel Injectors rail” is in sale since Wednesday, June 7, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Injectors”. The seller is “clean-injection” and is located in Acworth, Georgia. This item can be shipped worldwide.
  • Surface Finish: Black
  • Part Brand: Siemens deka denso HKS Denso
  • Country/Region of Manufacture: United States
  • Interchange Part Number: Nissan turbo silvia skyline 240sx 650cc 1000cc
  • Manufacturer Part Number: sr20-det rail sr20de s13 200sx 180sx turbo
  • Other Part Number: 1000cc 880cc 600cc 650cc 660cc 740cc 750cc 850cc
  • Brand: bosch ev14 Clean Injection
  • Fitment Type: Direct Replacement
  • Warranty: Yes

Fit Nissan 180sx 240sx s13 SR20 SR20DET bosch ev14 650cc Fuel Injectors rail

Tags: , , , , , , , , , ,