8 Flowmatched Genuine Siemens 80LB EV6 Short Stubby Pico Fuel Injectors Bosch fi

Wholesale Distribution Available for Fuel System Components! Siemens 80 LB/HR Short EV6 Fuel Injectors. These injectors are IN STOCK, on our shelves. You will receive a Set of 8 BRAND NEW Bosch style EV6 plug, pico, skinny injectors. The injectors are matched to have only a 2.0% variance, which means you know that you are getting accurate injectors. We have had these injectors tested to confirm the flow rates, and typically the system balance is between 1.0% – 2.0%. These High ResistanceApprox. Injector clips MAY be required for some models, research your install as these take OBD1 Bosch EV1 center notch style injector clips. All high performance injectors will require ECU tuning for proper performance. These injectors flow 82 lbs/hr at 58 PSI (4 BAR) In addition, these units are high-impedance. Despite the high flow rate these units are high resistance, plus they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed drive-ability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector. Many tuners push these injectors to 6 bar and higher. Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors pencil stream high flow injectors; these injectors utilize a multi-orifice tip for improved mixture preparation and atomization. This results in lower BSFC and better idle quality than many injectors with less flow. This newly released injector from Continental (Siemens) is based on the DEKA 7 family. This high-impedance injector will work with all factory ECM/PCM injector drivers. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures. Voltage Offset Table 6V 2.4ms 8V 1.14ms 10V 0.7 ms 11V 0.57ms 12V 0.46ms 13V 0.36ms 14V 0.28ms 15V 0.21ms We have injectors to fit almost every performance application! We do not lower invoice values since it is a violation of US and International custom laws. Let us work to resolve your problem so everyone is happy. TREperformance 1725 Monrovia Ave. Suite D7 Costa Mesa, CA 92627. The item “8 Flowmatched Genuine Siemens 80LB EV6 Short Stubby Pico Fuel Injectors Bosch fi” is in sale since Thursday, February 1, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Injectors”. The seller is “treperformance” and is located in Costa Mesa, California. This item can be shipped worldwide.

• Interchange Part Number: 850.34.14.15.8
• Number of Pieces: 8
• Other Part Number: Deka IX 9 840cc 850cc Flow Matched Flowtested
• Brand: Siemens
• Warranty: Yes
• Country/Region of Manufacture: United States
• Core Charge: None
• Part Brand: Siemens Deka VII
• Placement on Vehicle: Front
• Manufacturer Part Number: FI114800
• Important Information: Verify Flow Rate is what you need
• Fitment Type: Performance/Custom