Siemens Deka V 80lb/hr Fuel Injectors Fit EV1 Bosch Short Stubby Pico D5 850cc 4

Siemens Deka V 80lb/hr Fuel Injectors Fit EV1 Bosch Short Stubby Pico D5 850cc 4

Siemens Deka V 80lb/hr Fuel Injectors Fit EV1 Bosch Short Stubby Pico D5 850cc 4
Wholesale Distribution Available for ALL TRE Products! Genuine Siemens Deka V 80 LB/HR Fuel Injectors. These injectors are IN STOCK, on our shelves. You will receive a Set of 4 BRAND NEW, Siemens injectors. The injectors are matched to have only a 3.0% variance, which means you know that you are getting accurate injectors. We have had these injectors tested to confirm the flow rates, and typically the system balance is between 1.0% – 3.0%. These High ResistanceApprox. 12 OHMS Saturated Siemens injectors work on most top feed Bosch fuel injected vehicles. These injectors flow 80 lbs/hr at 43.5 PSI (3 BAR) In addition, these units are high-impedance. Despite the high flow rate these units are high resistance, plus they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed drive-ability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector. Many tuners push these injectors to 6 bar and higher. Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors pencil stream high flow injectors; these injectors utilize a multi-orifice tip for improved mixture preparation and atomization. This results in lower BSFC and better idle quality than many injectors with less flow. This newly released injector from Continental (Siemens) is based on the DEKA 5 family. It features a laser welded orifice plate with small holes for superior atomization. The light-weight internal components allow for fast opening/closing times and enhanced high-pressure capability. This high-impedance injector will work with all factory ECM/PCM injector drivers. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures. Engine performance and running quality are enhanced through the optimized 8 hole Multi-orifice spray pattern. Unlike competitors pencil stream high flow injectors; these High Flow injectors utilize a multi-orifice tip providing a true 26 degree spray pattern for improved mixture preparation. Injector clips MAY be required for some models, research your install as these take OBD1 Bosch EV1 center notch style injector clips. All high performance injectors will require ECU tuning for proper performance. We have injectors to fit almost every performance application! We do not lower invoice values since it is a violation of US and International custom laws. Let us work to resolve your problem so everyone is happy. TREperformance 1725 Monrovia Ave. Suite D7 Costa Mesa, CA 92627. And no repairs will be provided, nor labor charges covered by TREperformance Inc. The item “Siemens Deka V 80lb/hr Fuel Injectors Fit EV1 Bosch Short Stubby Pico D5 850cc 4″ is in sale since Tuesday, October 8, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Injectors”. The seller is “treperformance” and is located in Costa Mesa, California. This item can be shipped worldwide.
  • Manufacturer Part Number: Siemens 80 lb/hr Short – 4
  • Interchange Part Number: FI114700 114700 A2C32624700
  • Placement on Vehicle: Front
  • Warranty: Yes
  • Core Charge: None
  • Part Brand: Siemens Deka V

Siemens Deka V 80lb/hr Fuel Injectors Fit EV1 Bosch Short Stubby Pico D5 850cc 4

Tags: , , , , , , , , ,